Get an additional 20% Off - Use Coupon Code CA20

Poly Shield PL - Scooter Cover for Jawa/CZ 210 1988

Special Price CA$99.99 Regular Price CA$249.99
In stock
SKU
SC958171686

Introducing the latest addition to our product line: the Poly Shield PL Scooter cover. This cutting-edge cover is constructed with a single layer of high-strength 250T polyester, making it lightweight yet incredibly durable. It features a new material specifically engineered to provide ultimate protection for your scooter against all types of weather, including snow, ice, rain, wind, and intense UV rays. Rest assured, not a single drop of water will penetrate this 100% waterproof cover. Plus, for added peace of mind, we offer a lifetime warranty on our Poly Shield PL Scooter Cover.

 

The new Poly Shield PL Scooter cover is finally here! This cover is composed of 1 layer of extremely resistant 250T polyester. Lightweight yet durable, the cover is designed with a new material that has been crafted to protect your Scooter against any weather conditions such as snow, ice, rain, wind, and strong UV rays. The cover will not let a drop of water go through, as it is 100% waterproof. We back our Poly Shield PL Scooter Cover with a lifetime warranty.

  • Composed of one (1) layer of 250T polyester which offers the best water protection, making the cover 100% waterproof.
  • Extreme weather protection guaranteed: snow, ice, rain, wind, and strong UV rays.
  • Protects against acid rain, bird droppings, tree sap and other forms of environmental pollution to keep your Scooter clean.
  • Prevents more than 98% of dirt and dust particles from scratching and damaging your Scooter's surface.
  • Resists rot & mildew and will not stretch or shrink
  • Elastic lining in the front and back of the cover.
  • Two buckles and straps are attached to the cover in the front and back to have an extra tight fit.
  • Treated with UV Sun Inhibitor for maximum sunlight exposure.
  • Keeps your Scooter cooler during warm weather by reflecting sunlight
  • Protects your Scooter from sun damage.
  • Significantly reduces the premature aging of the Scooter and helps maintain resale value.
  • The cover is guaranteed to fit your Scooter perfectly and snugly.
  • The cover can be washed in a machine or by hand (must be air dried).
  • Install in less than 30 seconds.
  • Weight: 3-6 pounds (depending on Scooter Size)
  • Color: Grey
  • Free Storage Bag
  • LIFETIME warranty

What is the typical speed of delivery?
We strive to process and dispatch all orders on the same business day, and a tracking number will be sent to you via email within 24 hours. The estimated shipping time is typically 3 to 5 business days. For faster delivery, we also offer an express shipping option for an additional $30, which guarantees delivery within 1 to 2 business days.

What does the warranty cover?
The warranty safeguards against defects, soiling, fading, disintegration, stains, rips, and regular wear and tear of the cover. We have designed the cover to be highly durable, so we are confident that none of these issues will arise. However, in the unlikely event that the cover does fail, we will promptly provide a free replacement.


All orders ships within 24 hours.

Free Shipping to Canada and to the USA

CarCover.ca offers FREE Shipping with FEDEX / CanadaPost on all orders to anywhere in Canada and in the USA. If you'd like your order within 1-2 business days, you can choose the EXPRESS Shipping option at checkout for an additional fee of CAD$30.00. However, EXPRESS shipping is not available to a PO Box.

International Shipping

CarCover.ca offers international shipping with FEDEX / USPS for a Flat Rate of $120.00. Shipping time may vary however it usually takes 7-10 Business Days.

Tracking Number

Once you've placed your order, we'll send you an email confirmation with the carrier details and tracking number.

With numerous options available from various companies offering Vehicle covers, you might be pondering over the best choice and the reasons behind it. We firmly believe that our Vehicle covers outshine the competition in terms of quality. While the chances of needing a replacement for our covers are minimal, we provide a Lifetime Warranty to address any concerns or difficulties you may encounter with your cover.

How does the warranty work?

In the event that any issue arises with your Vehicle cover, rest assured that we will replace it with a brand new one. Our comprehensive coverage includes defects, soiling, fading, disintegration, stains, rips, and even normal wear and tear. Your satisfaction and the longevity of your cover are our top priorities.

How to file a warranty claim?

Email email us at Warranty@CarCover.ca and one of our agents can guide you through your claim.

You can find additional information about the Warranty Policy in our Terms and Conditions.

Car Cover Installation Instruction:

  1. Position the cover over the vehicle ensuring the front side is facing you. The front can be identified by a tag, label, or logo.
  2. If your vehicle's antenna isn't retractable or removable, utilize the provided antenna patch with your cover. Refer to the ANTENNA PATCH INSTALLATION section below for details. When using the patch, ensure you pass the antenna through the cover first.
  3. If your cover comes with mirror pockets, fit them over the mirrors.
  4. Extend the cover over both the front and rear bumpers.

Car Cover Removal Instruction:

  1. Unhook the cover from beneath both the front and rear bumpers.
  2. Lift and fold both sides of the cover onto the vehicle's top, forming a strip about 2 feet (60 cm) in width.
  3. Beginning from the vehicle's front, fold the cover in sections of roughly three feet (1 meter) from the front towards the back.

Antenna Patch Installation:

If your antenna doesn't retract, our antenna patch is here to assist. It's straightforward to install and should take just a few minutes.

  1. Fit the cover onto your vehicle to identify the exact position where the antenna touches.
  2. The front of the cover is labeled with a tag. Begin by positioning this at the front, and then smoothly pull the cover towards the back of the vehicle.
  3. When you reach the point where the cover meets the antenna, mark this location.
  4. Carefully make a small cut at the marked spot for the antenna to pass through. It's best to keep the incision minimal to prevent external elements from penetrating under the cover.
  5. Align the antenna patch over this cut, allowing the antenna to slide through.
  6. The patch will restore the cover, ensuring it remains sealed and protected.

Cable Lock Installation:

The Cable Lock sets comprise the cable itself, the accompanying lock, and a key designed specifically for the lock. All of our car covers come equipped with two grommet holes situated at the bottom, in the middle, on both sides of the cover.

To use the steel cable effectively, it should be threaded through the loop at one end and securely fastened to itself at the opposite end, as illustrated. The cable is then passed beneath the vehicle, threading through the remaining grommet that is scratch-resistant, and finally, it is secured in place using the provided lock.

It's worth noting that the cable lock set is exclusively included with our Gold Shield 5L car cover only.

Cable Lock Installation

IMPORTANT WARNINGS:

WARNING TO OWNERS OF REPAINTED VEHICLE: Applying a cover to a newly painted surface might harm it. If your car has recently been painted, please consult with your painter or body shop regarding the guidelines for using this cover.

CAUTION IN FREEZING CONDITIONS: On rare occasions, if a heavy downpour is immediately followed by temperatures plummeting below freezing, the cover might freeze to an ice layer formed between the car and the cover. If this occurs, DO NOT forcefully remove the cover. Should you need to take the cover off, pour warm water over the car and gently lift the cover, inspecting both its surface and the vehicle's during the process. If you feel any resistance, halt immediately — this means the ice hasn't fully melted. Pour more warm water on the affected area and continue.

CAUTION IN WINDY CONDITIONS: If you're in areas with high winds or storing your vehicle for a long time, ensure you fasten the provided buckles to snugly fit the cover under both the car's front and rear. This should be done even if you're using the optional lock and cable. This cover isn't a substitute for a garage. In strong winds, regularly check for any loose flapping. If wind gets beneath the cover, it might dislodge it or cause damage to the cover itself.

ADDITIONAL TIPS:
  • Do NOT cover a wet vehicle
  • Do NOT cover a hot tail pipe
  • Do NOT cover a vehicle with the windows or sun/moon roof open.
  • Do NOT cover a vehicle that has recently been painted
  • Do NOT cover a vehicle that has just been painted.
  • Do NOT cover a convertible vehicle with the top down
  • Do NOT cover a car directly after being driven. Let the car cold down before putting the car cover on.
  • Do NOT cover a car that has been exposed to the sun for an extended period. Ensure the vehicle has cooled down before putting on the cover.

Adhering to these guidelines is essential. We won't be accountable for any damage to your vehicle if these instructions aren't followed.

It is very important to take good care of your car cover so that the performance of the cover is not affected. Many contaminants such as dirt, grease, oil, etc. can be very harmful to the cover’s performance and it might even deteriorate the cover to the point that the water resistance become invalid. Therefore, we recommend that you regularly wash your cover so that it can protect your vehicle more effectively for longer period of time.

The car cover can be washed either by hand (recommended) or by washing machine.

To wash the cover by hand, simply install the cover on your vehicle and use a water hose to remove all the contaminants, then use a cloth with any multi-purpose cleaner to wash the cover. Apply the water again, then use can use a dry cloth or towel to dry out the cover or simply let it air dry.

For washing machine cleaning:

  • Use the largest washing machine possible (for very large vehicles, it is recommended to use industrial size machines).
  • Put in on GENTLE mode.
  • Use mild powder detergent to clean the cover with cold water. DO NOT use bleach or fabric softener.
  • Rinse the cover twice in order to remove all the detergent.
  • Cover must be air dry.